Skip to Content
Bathing
No Bubbles on Low Setting for BubbleMassage Bath
Try this solution
Increase the Blower Speed to Verify Bubbles Start
Refer to the following information for possible causes to diagnose a bubble massage bath that has no bubbles on the low setting.
This troubleshooting information is specifically for bubble massage baths. The bath will contain a "G" in the model number (example: K-1151-GLA-0).
This information applies to bubble massage baths manufactured after fall of 2012 with a gray colored blower.
Ensure that the whirlpool is a Kohler whirlpool by locating the model number and serial number located on the motor / pump assembly. Refer to "Identifying Your Bath or Whirlpool Model " for additional information.
No Bubbles on Low Speed
This is not a defect in the product.
At high water levels and low speed settings, some units may not product bubbles.
This design change was made as some individuals enjoy a lower bubble setting than was previously available.
Recommended Action
Increase the blower speed to verify bubbles start.
Need more help?
On this page