The part number and design of the aerator for the Revival faucet line has changed a few times through the life of the Revival series. Refer to the information below to determine the appropriate aerator for your faucet.

Installed prior to December 31, 2000

The aerator part number was 57376 -** and has been discontinued along with the internal parts of the kit.

The aerator kit, 1103464-**, is the direct replacement at 1.5 gallons per minute (gpm) flow rate and a slight design change

Installed January 1, 2001 - November 1, 2018: (California installations - see below if installed after January 1, 2001)

The correct aerator will depend on the gpm flow rate: the 1000952-** is 2.5 gpm and the 1108235-** is 1.5 gpm. The kits are interchangeable.

Installed January 1, 2001 - November 1, 2018

The aerator kit 1272278-** is 1.2 gpm. This aerator is required for faucets installed in California due to water regulations.

Note: ** indicates a finish is required for the service part.

• BC: Bright Chrome (Use this finish for CP: Polished Chrome and G: Brushed Chrome faucets.)

• VU: Polished Brass

• SR: Polished Nickel, Brushed Nickel

• FB: French Gold

• BA: Brushed Bronze