To remove the handle for the widespread Alterna bathroom faucet or Alterna bidet faucet, refer to the following directions.

Cube, Lever, and Post-1997 Square Handle

1
Hold on to the handle while turning the handle base or skirt counterclockwise by hand or with a strap wrench, taking care to protect the finish.

2
Remove any remaining components to expose the valve. Set all parts aside for re-use.

3
The valve can now be replaced or other repairs made.

4
Reassemble handle parts in reverse order.

Pre-1997 Square Handle

1
Gently pry off the plug button in the center of the handle using a thin flat blade screwdriver, taking care to protect all finish surfaces.

2
Unscrew the Philips screw holding the handle to the valve stem.

3
Gently pull of the handle and any remaining components to expose the valve. Set all parts aside for re-use.

4
The valve can now be replaced or other repairs made.

5
Reassemble handle parts in reverse order.

Note: Remove mineral deposits with a 50/50 white vinegar and warm water solution.