Refer to the following directions for removing the handles for the widespread Coralais bathroom or bidet faucet.

Lever and Cross Handles (Without Handle Insert)

1
Hold on to the handle while turning the skirt counterclockwise by hand or with a strap wrench, taking care to protect all finish surfaces.

2
Remove the Philips screw and any remaining components to expose the valve.

3
Reassemble the handle parts in reverse order.

Lever Handle (With Handle Insert)

1
Unscrew the Philips screw from the center of the handle that attaches the handle to the valve stem, taking care to protect all finish surfaces.

2
Gently pull off the handle and any remaining components to expose the valve.

3
Reassemble the handle parts in reverse order.

Sculpted Acrylic or Blade Handle

1
Gently pry off the plug button in the center of the handle using a thin flat blade such as a screwdriver, taking care to protect all finish surfaces.

2
Unscrew the Philips screw that attaches the handle to the valve stem.

3
Gently pull off the handle and any remaining components to expose the valve.

4
Reassemble handle parts in reverse order.

Round Stacked Handle

1
Gently pry off the cap on the top of the handle using a thin flat blade such as a screwdriver, taking care to protect all finish surfaces.

2
Unscrew the Philips screw that attaches the handle to the valve stem.

3
Gently pull of the handle and any remaining components to expose the valve.

4
Reassemble the handle parts in reverse order.

Triangular Shaped Handle (Euro Handle)

1
Unscrew the setscrew on the side of the handle with a 1/8" hex wrench, taking care to protect all finish surfaces.

2
Gently pull of the handle and any remaining components to expose the valve.

3
Reassemble handle parts in reverse order.