Refer to the following directions to remove the handles for the widespread Cygnet bathroom faucet or Cygnet bidet faucet.

Globe Handle

1
Hold the handle while turning the skirt counterclockwise by hand or with a strap wrench, taking care to product all finish surfaces.

2
Remove any remaining components to expose the valve.

3
Set all parts aside for reuse.

4
The valve can now be replaced or other repairs made.

5
Reassemble handle parts in reverse order.

Note: Remove mineral deposits with a 50/50 white vinegar and warm water solution.

Cylinder Handle

1
Pull straight up on the cylinder portion of the handle to remove.

2
Remove any remaining components to expose the valve.

3
Set all parts aside for reuse.

4
The valve can now be replaced or other repairs made.

5
Reassemble handle parts in reverse order.

Note: Remove mineral deposits with a 50/50 white vinegar and warm water solution.

Lever Handle

1
Remove the end cap from the short end of the lever turning counterclockwise by hand or with a strap wrench taking care to protect all finish surfaces.

2
Life off the lever exposing the screw.

3
Remove the Philips screw and any remaining components to expose the valve.

4
Set all parts aside for reuse.

5
The valve can now be replaced or other repairs made.

6
Reassemble handle parts in reverse order.

Note: Remove mineral deposits with a 50/50 white vinegar and warm water solution.