To remove the handle for the widespread Taboret bathroom, bidet, kitchen or entertainment faucet, refer to the following directions.

Square or Swirl Handle

1
Hold on to the handle while turning the skirt counterclockwise by hand or with a strap wrench, taking care to protect all finish surfaces.

2
Remove any remaining components to expose the valve. Set all parts aside for re-use.

3
The valve can now be replaced or other repairs made.

4
Reassemble handle parts in reverse order.

Lever or Tee Handle

1
Remove the end caps from both ends of the lever, turning counterclockwise by hand or with a strap wrench, taking care to protect all finish surfaces.

2
Remove the setscrews from inside the handle with a 1/8" hex wrench.

3
Lift off the center post to expose the screw.

4
Remove the Philips screw and any remaining components to expose the valve. Set parts aside for re-use.

5
The valve can now be replaced or other repairs made.

6
Reassemble parts in reverse order.

Note: Remove mineral deposits with a 50/50 white vinegar and warm water solution.