Skip to Content
Other Products
My Cutting Board is not looking great
Try this solution
Troubleshoot not great looking cutting board
To keep your cutting board looking great, please follow these simple care and cleaning instructions.
Wipe the cutting board surface with a damp cloth, and dry it thoroughly after each use.
Apply a coat of mineral oil to all cutting board surfaces regularly (especially if the material appears faded or dried out).
Store the cutting board in a dry, well-ventilated area when it is not in use.
Do not clean the cutting board in the dishwasher, immerse the cutting board in water, or use the cutting board in the microwave.
💡Color variations in natural material are typical, and add uniqueness and character to the board.
1
Clean the Channel on the K-305 Rite-Temp Diverter Valve
Low flow from the shower may be caused by a build up of sediment or debris in the channel between the valve and diverter on the K-305 Rite-Temp Diverter Valve. Follow the steps below to clean this channel.
1
Turn off the water supplied to the shower valve.
2
Remove the screws located in the 3 and 9 o'clock positions that hold on the black plastic mixer cap.
3
Remove the mixer cap and pressure balancing unit that is sitting inside of the brass valve body.
1
The channel is located in the brass valve body at the 6 o'clock position. Clean the area around the metal tube in the center of the channel. A paper clip or piece or wire may be helpful to remove any debris. Use a spray bottle to apply white vinegar which may help dissolve mineral buildup.
2
When finished, reinsert the pressure balancing unit and reattach the mixer cap.
💡Note:💡 The K-11748 Rite-Temp Diverter Valve has a different valve body and does not have a channel in the back of the valve body that can be cleaned.
On this page