Skip to Content
Valves (Shower & Bath)
Water Continues to Run After Mixer Cap and PBU Installation
Try this solution
Troubleshoot Water Continues to Run After Mixer Cap and PBU Installation
Refer to the information below for tips on parts installation for Rite-Temp Valves K-304, K-305, K-11748, K-306, or K-2971.
When installing a mixer cap and pressure balancing unit (PBU) for Rite-Temp Valves, ensure that the o-rings do not slip off of the PBU. If an o-ring is not aligned properly, it can cause water to constantly run from the shower head or tub spout. Applying silicone lubricant to the o-rings can help hold them in place when installing the PBU.
When installing the metal collar, make sure it is installed in front of the mixer cap, not in-between the mixer cap and PBU, as shown below for the K-304 replacement kit, part number GP76851. If it is installed between the mixer cap and PBU, the cap will not seal and will cause a constant run of water.
Additional Resource:
Video: Mixer Cap and Pressure Balancing Unit Replacement Parts and Temperature Adjustment
On this page